SIDE TYPE

SIDE TIPPER TRAILERS – TWO SIDE TIPPER TRAILER

 

Special design with lock system to allow dump right and left.
Base 5/4 chequred plate
Front Panel Front panel reinforced with NPU not to allow the load carried to damage the front panel.
Crosses and Other All sheets are ST52.3 steel quality

Hydraulic:  Pump 45-85 liters double turn gear pump
Hoses R2 steel hoses durable to 280 bars working pressure.
Dumper Lift High-strength steel cylinders of 3 telescopic with minimum 300 lifting angle and made of cold drawn tubes durable for power in this angle.

Chassis: Strengthened “I” section centre members are welded automatically by submerged welding machine. They are welded between 120/14 mm bottom or top steel plate and 5 mm hub plate.

These racks are supported against being twisted with each other by binding them with axle beams

Axles:  Turkish Brand, BPW or SAF 3 x 9,12,14,16 Ton axles brake drum or disc

There are brake shoes and heavy brake levers suitable for TSE norms

Suspensions ; It is supplied with Turkish brand of 6 pcs of air cushion with Z leaf spring or mechanical leaf spring suspension with 12 mm x12 pcs of layer with 100 mm width

Brake System ; Wabco brand ABS or EBS braking system will be used.

Brake Chambers ; 1 Axles with T 30/30 emergency brake chamber,2 axles with T 30 service brake chambers

Electrical system ; 2×7 pin sockets – 24V, lights accord to standard in SAE rear stop lamps, side marker lamps, brake safety warning lamps and signal light fitted at the rear

2 tail & stop combined lamps (red)

2 turn signal combined lamps (orange)

1 license lamp (white)

Tires; 385/65 R22,5 or 12 R22,5 or 13 R22,5 or 315/80 R22,5 Bridgestone, Pirelli, Goodyear, Continental

Rims; 11.75 R22.5 Jantsa-Jantas Brand

King Pin ; Jost  or equivelent Turkish brand OMS DIN 74080 standards 2’’ or 3,5’’ king pin detachable from below made by SAE standards 8 bolt type. With E certificate.

Landing Gear ; Jost  or equivelent Turkish brand front Jack feet are telescopic,parallel working,double speed jointed with wide shoes static 50 tons, dynamic 25 tons capacity

Painting ; Before the painting, all surface is sand blasted

After sand blasting small parts are cleaned carefully

Epoxy gray is used for first protecting.

3 Times of high quality paints are applied on trailer

Thickness of painting checked by electronic devices

The color of trailer is selected by our customer according to RAL codes

Accossories;   Multi-piece plastic fenders that covers back axle shaft tires

1 plate tool box

Control Panel(Mob, air clock, access ramp lever)

Plastic water tank

Spare tire conveyor between trailer legs

Mounting and mounting space